BL1000S MCCB up to 1 000 A

Parameters
Accessories
Certification marks
Rated operating current | 315, 630, 800, 1000 A |
Rated operating voltage | max. 690 V |
Rated frequency | 50-60 Hz |
Utilization category (switching mode) / AC 690 V | AC-23B |
Rated short-circuit ultimate breaking capacity / 230 V | 85 kA |
Rated short-circuit ultimate breaking capacity / 400 V | 65 kA |
Rated short-circuit ultimate breaking capacity / 500 V | 45 kA |
Rated short-circuit ultimate breaking capacity / 690 V | 20 kA |
Rated short-circuit making capacity / AC 415 V | 140 kA |
Width | 210 |
Height | 350 |
Depth | 135 + 63 mm |
Withdrawable design |
![]() |
Plug-in design | - |
Auxiliary switch |
![]() |
Relative switch |
![]() |
Signal switch | - |
Shunt trip |
![]() |
Undervoltage release |
![]() |
Undervoltage release with early switch | - |
Hand drive - front/side | + / - |
Hand drive with adjustable lever |
![]() |
Motor drive |
![]() |
-
Declaration of conformity (1) (56,19 kB)
-
Declaration of conformity (2) (56,05 kB)
-
Declaration of conformity (3) (55,38 kB)
-
Declaration of conformity (4) (55,28 kB)
-
Declaration of conformity (5) (54,83 kB)
-
Declaration of conformity (6) (55,31 kB)
-
Declaration of conformity (7) (56,18 kB)
-
ESČ 1170296 (1,13 MB)
-
ESČ 1170296 (1,11 MB)
-
ESČ 1150738 (926,89 kB)
-
ESČ 1150738 (1,05 MB)
-
ua 1.001.000442-12 (1,04 MB)
-
Connecting set - CS-BL-A022 (348,38 kB)
-
Terminal cover - OD-BL-KS09 (446,5 kB)
-
Insulating grommets - OD-BL-KS03 (587,53 kB)
-
Connecting set - CS-BL-B002, CS-BL-B003, CS-BL-B004 (925,01 kB)
-
Connecting set - CS-BL-W010, CS-BL-W011 (1018,95 kB)
-
Overcurrent release - SE-BL-J...-MTV8,SE-BL-J...-DTV3 (529,09 kB)
-
Switch-disconnector - BL1000SE305-1000-V (2,35 MB)
-
Insulating barriers - OD-BL-KS02 (141,77 kB)
-
Hand drive lever - RP-BL-CP10, RP-BL-CP11 (353,04 kB)
-
Hand drive unit - RP-BL-CK10, RP-BL-CK52,RP-BL-CK53,RP-BL-CK54,RP-BL-CK55 (1,61 MB)
-
Connecting set - CS-BL-A016 (273,18 kB)
-
Connecting set - CS-BL-A021 (366,43 kB)
-
Withdrawable device - ZV-BL-1600-300 (1,21 MB)
-
Tester of overcurrent releases - ZES-4 (3,92 MB)
-
Overcurrent release - SE-BL-....-U001 (565,88 kB)
-
Switching unit - BL1000SE320 (1,89 MB)
-
Sealing insert - OD-BL-VP01 (179,1 kB)
-
Hand drive bearing - RP-BL-CN10, RP-BL-CN20, RP-BL-CH10 (1,48 MB)
-
Undervoltage release - SP-BL-...., SV-BL-.... (272,09 kB)
-
Switch - PS-BL-2200 (407,7 kB)
-
Mounting set - OD-BL-MS01 (170,02 kB)
-
Signalling of position - SO-BL-0010 (794,52 kB)
-
Connecting cable - OD-BL-KA01 (1,18 MB)
-
Terminal cover - OD-BL-KS01 (342,74 kB)
-
Mechanical interlocking - RP-BL-CB10 (1,28 MB)
-
Connecting set - CS-BL-A010, OD-BL-KS04 (604,65 kB)
-
Overcurrent release - SE-BL-....-MTV8,SE-BL-....-DTV3 (730,38 kB)
-
Insulating barriers - OD-BL-KS08 (195,95 kB)
-
Switch-disconnector unit - SE-BL-J....-V001 (210,92 kB)
-
Signalling unit - SB-BL-0002 (1,05 MB)
-
Connecting set - CS-BL-A015 (281,42 kB)
-
Motor drive - MP-BL-.... (2,27 MB)
-
Delay unit - BZ-BX-X230-A (312,65 kB)
-
Tester of overcurrent releases - ZES-4 (500,49 kB)
-
Cover of switch on push-button - OD-BL-KT01 (149,96 kB)
-
Insulating sheet - OD-BL-IT, OD-BH-IT (3,27 MB)
-
Mounting set - OD-BL-MS02 (291,96 kB)
-
Lockable lever - OD-BC-UP01, OD-BD-UP01, OD-BH-UP01, OD-BL-UP01 (707 kB)
-
Switching unit - BL1000SE308 (1,41 MB)
Facebook profil - OEZ s.r.o.